Thailand prefabricated steel structure warehouse workshop office high rise building made in china
Review
Description
China Steel Structure Warehouse For Factory in Thailand
All kinds of steel structure warehouse workshop office in Thailand
steel structure warehouse Detail material informations are as follows:
1,The cladding system use rockwool sandwich panel,50mm thickness ,0.5mm thickness steel sheet ,
no need ventilation fan,roofing pitch requirement, is rockwool like the walls
2,Clients no need to provide and install transparent super carbonate skylight sheets.
3. For the steel structure building wall and second floor for office
a) Rockwool sandwich panel for the steel structure building wall.
b)Not all of the building is steel structure,from the ground 1m concrete wall,then steel structure wall system.
c)parapet wall in the roofing
d) the load for the second floor is 200kn/sqm.
e)supply steel decking floor
4. For the door,
Two big special steel structure warehouse use rolling doors( electric type) on the sides with 5 meters hight,
their location requirements 2 on the side and one small 4m *3m in the left and right.
Also combined the steel structure type canony above the door
5. For the windows
4m*2.5m windows surrounded both the ground floor and first floor on the front and back side.
3 big 1m*6m windows on each angel of the steel structure building wall.
All the windows are designed as low-e ,good insulation and noise protection special steel structure office use
glass( 6mm+12mm+6mm).
6. All the sketch of steel frame, CAD drawings and 3D steel structure looks,all provided to clients before
projects started.
So the clients know what will be the steel structure building looks like,before finish.
Read More
